BXXYG - V 114(X3523)/VULCABOND BLUE,PART A,P/N 131021-01 ADHESIVE
- MSDS: BXXYG
- Manufacturer: STABOND CORP
- Product Name: V 114(X3523)/VULCABOND BLUE,PART A,P/N 131021-01 ADHESIVE
- National Stock Number: 1680-00-808-0748
Product Identification
Product ID:V 114(X3523)/VULCABOND BLUE,PART A,P/N 131021-01 ADHESIVE
MSDS Date:07/18/1991
FSC:1680
NIIN:00-808-0748
Kit Part:Y
MSDS Number: BXXYG
Responsible Party
GARDENA, CA 90249-3008
US
Emergency Phone: 800-424-9300
Info Phone: 213-770-0591
Preparer: D. MARTINSON
Cage: 25670
Contractor
Telephone: 213-770-0591/800-4249300
Cage: 25670
Ingredients
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA 313) (CERCLA)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 77%
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM/300STEL;9495
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
VOLATILE ORGANIC COMPOUNDS, (COATING V.O.C. AND MATERIAL
RTECS: 9999999VO
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: SEVERE IRRITATION, MAY
BURN EYES. SKIN: MAY CAUSE DRYING, IRRITATION. INHALATION: NOSE AND
THROAT IRRITATION, HEADACHES, DIZZINESS, DROWSINESS,
UNCOORDINATION, NAUSEA, UNCONSCIOUSNESS. IN GESTION: LOW ORDER OF
TOXICITY. CHRONIC:PROLONGED OR REPEATED CONTACT MAY CAUSE
DERMATITIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION, BURNING SENSATION. SKIN:
IRRITATION, DRYING, DERMATITIS. INHALATION: IRRITATION OF MUCOUS
MEMBRANES, HEADACHES, DIZZINESS, DROWSINESS, UNCOORDINATION,
NAUSEA, UNCONSCIOUSNESS, UPSET STOMACH, VOMITING. INGESTION:
HEADACHES,NAUSEA, VOMITING, DIARRHEA, UNCONSIOUSNESS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED. CONTAINS NO KNOWN
SUSPECTED CARCINOGENS.
First Aid
First Aid:EYES: WASH WITH LARGE AMOUNTS OF WATER. IF IRRITATION
PERSISTS, GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED
CLOTHING. WASH AREA WITH LARGE AMOUNTS OF WATER. IF ADVERSE
SYMPTOMS DEVELOP, GET MEDIC AL ATTENTION. INHALATION: MOVE TO
FRESHAIR. RESTORE BREATHING IF REQUIRED. GET MEDICAL ATTENTION.
INGESTION: DO NOT INDUCE VOMITING. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:TCC
Flash Point:20.0F,-6.7C
Lower Limits:1.4%
Upper Limits:11.4%
Extinguishing Media:FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS IS REQUIRED
FOR FIRES IN ENCLOSED AREAS.
Unusual Fire/Explosion Hazard:VOLATILE SOLVENT CONSTITUENT CAN READILY
FORM EXPLOSIVE OR FLAMMABLE MIXTURES IN AIR. VAPORS CAN FLOW ALONG
SURFACES TO DISTANT IGNITION SOURCES AND FLASH BACK.
Accidental Release
Spill Release Procedures:HANDLE AS A FLAMMABLE LIQUID. REMOVE IGNITION
SOURCES. SOAK UP WET MATERIALON A NON-COMBUSTIBLE ABSORBENT AND
PLACE IN A CLOSED METAL CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL,WELL VENTILATED AREA
AWAY FROM IGNITION SOURCES AND STRONG OXIDIZING AGENTS.KEEP
CONTAINERS CLOSED.DO NOT TRANSFER TO PLASTIC CONTAINER.
Other Precautions:GROUND AND BOND METAL CONTAINERS WHEN DISPENSING. NO
SMOKING IN AREA OF USE OR STORAGE. USE ONLY NON-SPARKING TOOLS NEAR
WET ADHESIVE OR SOLVENT VAPORS. VAPORS MUCH HEAVIER THAN AIR AND
CAN COLLECT IN DANGEROUS CONCENTRATIONS IN LOW AREAS.
Exposure Controls
Respiratory Protection:MATERIAL NOT SUITED FOR SPRAY. IN RESTRICTED OR
NON-VENTILATED AREAS WHERE VAPOR EXPOSURE MAY BE ENCOUNTERED, USE
RESPIRATOR WITH ORGANIC SOLVENT VAPOR ADSORBING FILTER OR
INDEPENDENT AIR SUPPLY.
Ventilation:MECHANICAL VENTILATION AND LOCAL EXHAUST ADEQUATE TO MEET
TLV REQUIREMENT AND PREVENT EXPLOSIVE CONCENTRATION OF VAPORS.
Protective Gloves:POLYETHYLENE OR NATURAL RUBBER GLOVES.
Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS.
Other Protective Equipment:EYE WASH FOUNTAIN OR BOTTLES. SOLVENT
INSOLUBLE BARRIER HAND CREAM. DO NOT USE CONTACT LENSES.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
THIS ENTRY DESCRIBES PART A (P/N 131021-01) OF A TWO PART ADHESIVE
SEALING COMPOUND KIT INCLUDED IN A 14 ITEM ACTUATOR OVERHAUL KIT
(P/N 303262-01). TWELVE OF THE ITEMS ARE MECHANICAL MATERIALS
LISTED AS ARTICLES. SEE THIS SAME NSN, CAGE 04963, FOR PART B (P/N
131035-01) DATA.
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:176F,80C
Vapor Density:>AIR
Spec Gravity:0.9
Evaporation Rate & Reference:SLOWER THAN ETHER.
Solubility in Water:NIL
Appearance and Odor:LOW VISCOSITY BLUE LIQUID.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZATION AGENTS CAN CAUSE SPONTANEOUS COMBUSTION.
Stability Condition to Avoid:KEEP AWAY FROM ALL SOURCES OF IGNITION AND
HEAT.
Hazardous Decomposition Products:BURNING MAY PRODUCE NITROUS OXIDE,
PHENOLS, CARBON DIOXIDE, HYDROGEN CYANIDE, CARBON MONOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS FOR MEK. SOLID INGREDIENTS NOT CONSIDERED
HAZARDOUS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.